Make: | Nissan | |
Model: | Qashqai (Built before October 2016) | |
Model Code: | P32S | |
Date of Manufacture: | December 2013 - September 2016 | |
OE Sensor Manufacturer: | CONTINENTAL | |
OE Sensor Number: | 407003VU0A |
The following sensors are all compatible with: Nissan Qashqai 2013-2016.
72-20-367
OE-R Clamp-In Sensor S057
Aftermarket OE replacement sensor. Please note a scan tool is required to gather sensor information – including the Sensor ID wh... (more)
72-21-945
T-Pro Hybrid 3.5 3200 Clamp-In Sensor
The fastest configurable universal sensor in the market boasts higher vehicle coverage besides programmable technology. 99% cover... (more)
Important: The latest ATEQ Software is needed to configure or program this sensor.
Click here for more information.
Device | Minimum Software Version |
---|---|
VT56 | DA1-30-11 |
VT56 SE | DLA1-30-11 |
VT46 | JA2-18-12 |
H46 | JU2-18-12 |
VT36 | HA1-18-05 |
H36 | HU1-18-05 |
VT55 | Not currently compatible |
Updates for other tool suppliers have not been released yet. Please check with your tool supplier for their expected software release date.
72-21-946
T-Pro Hybrid 3.5 3200 Snap-In Sensor
The fastest configurable universal sensor in the market boasts higher vehicle coverage besides programmable technology. 99% cover... (more)
Important: The latest ATEQ Software is needed to configure or program this sensor.
Click here for more information.
Device | Minimum Software Version |
---|---|
VT56 | DA1-30-11 |
VT56 SE | DLA1-30-11 |
VT46 | JA2-18-12 |
H46 | JU2-18-12 |
VT36 | HA1-18-05 |
H36 | HU1-18-05 |
VT55 | Not currently compatible |
Updates for other tool suppliers have not been released yet. Please check with your tool supplier for their expected software release date.
72-21-947
T-Pro Hybrid 3.5 3200 Black Clamp-In Sensor
The fastest configurable universal sensor in the market boasts higher vehicle coverage besides programmable technology. 99% cover... (more)
Important: The latest ATEQ Software is needed to configure or program this sensor.
Click here for more information.
Device | Minimum Software Version |
---|---|
VT56 | DA1-30-11 |
VT56 SE | DLA1-30-11 |
VT46 | JA2-18-12 |
H46 | JU2-18-12 |
VT36 | HA1-18-05 |
H36 | HU1-18-05 |
VT55 | Not currently compatible |
Updates for other tool suppliers have not been released yet. Please check with your tool supplier for their expected software release date.
72-20-845
Schrader Delta EZ 2.0 Clamp-In Sensor - EU 433Mhz
Schrader programmable EZ-Sensor 2.0 433Mhz EU. Requires a TPMS diagnostic tool to program the sensor for a particular vehicle.... (more)
72-20-106
Box Of 10 Clamp-In Valves for VDO TG1C
A box of 10 Schrader clamp-in valves, with each including: 1 Valve Stem and 1 Valve Cap . These valves are suitable for use with... (more)
72-20-217
Service Kit for VDO TG1C
A single VDO service kit, which includes: 1 Nut, 1 Rubber Grommet, 1 Metal Washer, 1 Valve Cap and 1 Valve Core. This service ki... (more)
72-20-482
Box Of 10 Replacement Clamp-In Valves for VDO TG1C
A box of 10 clamp-in valves, with each including: 1 Valve Stem, 1 Nut, 1 Rubber Grommet, 1 Metal Washer, 1 Valve Cap and 1 Valve C... (more)
72-20-442
Box Of 10 Replacement Clamp-In Valves for VDO TG1C
A box of 10 clamp-in valves, with each including: 1 Valve Stem and 1 Valve Cap. These valves are suitable for use with VDO TG1C ... (more)
72-20-514
Box Of 10 Service Kits for VDO TG1C
A box of 10 service kits, with each including: 1 Nut, 1 Rubber Grommet, 1 Metal Washer, 1 Valve Cap and 1 Valve Core. This servi... (more)
You must be logged in to view relearn procedures.
Every effort is made to ensure that this page is as accurate as possible, however the information cannot be guaranteed.