72-20-711
Tool Kit and Carry Case
This TPMS Tool Kit contains all of the workshop tools required for servicing or replacing TPMS sensors.
This TPMS Tool Kit comes ... (more)
Barcode: 5055563003567
Comparative Part Numbers: , T72-20-711
72-20-708
Calibrated Torque Tool With 6 Piece Bit Set
This Calibrated Torque Tool is used for the removal and fitment of TPMS sensors and service kits, which includes:
7mm Hex Socket1... (more)
Barcode: 5055563006650
Comparative Part Numbers: 3-162A, ATEQ-CAL-TORQUE-TOOL, T72-20-708
72-20-702
Valve Core Torque Tool
The Valve Core Torque Tool is used to correctly torque the core into the valve. Many sensors have metal valves and to minimise cor... (more)
Barcode: 5055563006438
Comparative Part Numbers: 3-150T, T72-20-702
72-20-706
Pressure Chamber
Allows TPMS sensors to be quickly and effectively pressurized and tested before fitting to the wheel and tyre assembly.
Barcode: 5055563001587
Comparative Part Numbers: ATEQ-PRESSURE-BOX, T72-20-706
72-20-709
5 Grommet Removal Tools
Avoid damaging the Aluminium threads on TPMS valves by using the Grommet tool to remove the rubber seals.
Barcode: 5055563002294
Comparative Part Numbers: 3-164T, TECH-GROMMET-TOOLS, T72-20-709
72-20-710
T6 Torx Screwdriver
This T6 Torx Screwdriver is designed for servicing VDO TG1B Style Sensors.
Barcode: TYR-T008-1
Comparative Part Numbers: 3-180, T72-20-710
72-20-719
Redi Sensor Hand Tool
This workshop tool is used specifically for the correct fitting of VDO REDI sensors.
Barcode: 5055563005066
Comparative Part Numbers: , T72-20-719
72-20-704
Box Of 10 Grommet Removal Tools
Avoid damaging the Aluminium threads on TPMS valves by using the Grommet tool to remove the rubber seals.
Barcode: 5055563000993
Comparative Part Numbers: 5610903, 6015, 65784-68, T72-20-704
72-20-721
Redi Sensor Mounting Glue 9.6g for 20 Sensors
This consumable is used specifically for the correct fitting of VDO REDI sensors. There is enough glue to fit 20 REDI sensors.
Barcode: 5055563005080
Comparative Part Numbers: , T72-20-721
72-20-722
Redi Sensor Mounting Glue 100g for 200 Sensors
This consumable is used specifically for the correct fitting of VDO REDI sensors. There is enough glue to fit 200 REDI sensors.
Barcode: 5055563005097
Comparative Part Numbers: , T72-20-722